What a geometry audit proves—and what it leaves to engineering
Follow a flange through topology checks, native export inspection and design requirements. Learn to read passed, failed and unverified evidence.
A geometry audit answers a narrower question than “Is this design ready?” It can show that a solid is valid, a mesh is closed or an exported file preserved the intended components. Those checks matter, but they are different from proving that the design meets its brief or survives its operating conditions. Intact keeps these claims separate so the evidence remains useful.
Begin with measurable intent
Consider an 80 mm diameter flange, 8 mm thick, with a 24 mm bore and six 6 mm through holes on a 60 mm bolt circle. The brief defines more than an envelope: bore concentricity, hole centers, diameter, count and depth all matter. A model could have the correct outside dimensions and still contain blind holes, the wrong bolt circle or a shifted bore.
Ask ChatGPT to save supported requirements before building. State which dimensions are exact, what tolerance applies and which interfaces are critical. Without acceptance criteria, the system can inspect geometry but cannot claim the intended design was verified.
First gate: the object itself
For native solids, Intact checks B-rep validity, finite positive volumes, dimensions and tessellation. For a sampled mesh, it checks finite coordinates, watertightness, winding and positive volume. A mesh check does not turn the mesh into an exact CAD solid.
Bounded healing can address certain kernel or orientation problems only while preserving strict geometric invariants. A repair that changes the required dimensions or discards a feature is a design change, not a harmless correction. A rejected build preserves the last saved revision.
Second gate: the delivered files
The viewport is a tessellated representation. The file a downstream tool receives must be inspected independently. Native STEP reopening checks part identity, dimensions and volume. Other export checks inspect GLB structure and 3MF integrity. This catches cases where a reasonable-looking preview conceals a missing component or an export discrepancy.
Third gate: the requirements
Design verification measures supported saved requirements against actual native geometry. Ask for the measured values and the criterion for each result, not just an overall label. A check may pass, fail or remain unverified. Known failed requirements block the proposal. Missing or unsupported criteria do not become passes.
Sampled thickness or clearance evidence has a bounded scope. A few safe wall-thickness samples do not establish the global minimum across an arbitrary surface. Likewise, a component count does not prove all those components have the correct geometry.
Validation reaches beyond the geometry
Does the model represent the real bracket, manufacturing process and load path? Are the material and supports appropriate? A CAD audit alone cannot answer these questions. Validation needs suitable design references, physical assumptions and, where appropriate, independent analysis or experiments.
For numerical studies, inspect mesh quality, residuals, force or heat balance, refinement and regime limits. A simulation image is not sufficient evidence. An unrefined result stays unverified even if its colors look smooth.
A prompt that asks for evidence
Audit the current flange and verify the saved requirements against the native exported geometry. Report the actual envelope, bore, hole diameters, centers and through depth. Separate passed, failed and unverified checks. Preserve the revision and do not weaken the acceptance criteria.
Use Review and the user tutorial to inspect the result. See the architecture explanation for the complete gate and repair loop.
Install once.
Design through conversation.
Download Intact v0.20.0 for Windows. Install privately in Codex with your own account; CAD runs on your computer.
Follow the installation procedure →